2048 Pixels LED Pixel Controller , Programmable LED Strip Controller T1000s

LED Pixel Controller T1000s SD Card Freely Programmable Controller For Full Color Strip Light

Description:
Slot for memory cards:

Type: SD Card

Capacity: 128MB-2GB

Store file: *. Light-emitting diode

Physical parameters:

Working temperature: -30-85 degrees Celsius

Working voltage: 5V DC Current / DC7.5-24V

Working power: 2W

Weight: 0.3KG

Size: l165mm × w80mm × h30mm

Signal port: 3-pin connection port

T-1000S Systems Features
1.32-65536 gray, gamma correction software support.

2. Anchor point, line, surface, rules and special handle.

3. Single port output, can support 2048 pixels.

4. Several controllers can be cascaded together and work synchronously,

Play content stored on SD card.

5. Compatible with single line or double line chips.

Note:

When the T1000S controller loads less than 512 pixels, the frame rate can go up to 30fps.

When the T-1000s is controlled over 512 pixels, the frame rate will automatically drop.

IC support (one IC symbolizes a pixel point)

Button definition

Peculiarities:

1.256 gray, gamma correction processing software.
2. Support for rules and special handles.
3. Controller, port output, can bring 1024/2048 lamp.
4. Offline control, playback the content stored in the SD card
5. T-1000C store a maximum of 16 documents
Note: Model T-1000S with single port output, when it controls 512 pixels, the speed can reach 30fps, more than 512 pixels , the frame rate will slow down automatically

Connection diagram:

Button regulating function:

System architecture solutions:

The exact parameters:
Memory Card Slot:
. Type: SD cards
. Capacity: 128MB-2GB
. File format: FAT format
. Storing files: * .led
Physical parameters:
. Weight: 0.2 kg
. Size: 122mm * 67mm * 25mm
. Temperature: -40-85 degrees
. Volgate: DC5V / DC7.5-24V
. Power: 3W

Note:
To copy files to SD card, you need to format to SD card first, please note that each copy needs to be formatted before.
The SD card must be formatted as "FAT".

Note: For TTL (SPI) signal, the controller signal must connect to

The LED luminaire is directly grounded.

T1000S controller * 1pc

SD card * 1pc